OIL-GAS SEPARATION TECHNOLOGY

The standard Technokomp horizontal gas separator consists of four different stages, described below, for which we are able to guarantee very high gas-oil separation efficiency.

Oil separation stages

  • Inertial
  • AISI 304 demister
  • First stage coalescing filter
  • Second and final special coalescing filter

The Technokomp vertical gas separator consists of four different stages, described below, for which we are able to guarantee very high gas-oil separation efficiency.

Oil separation stages

  • Inertial
  • AISI 304 demister
  • First stage: coalescing filter
  • Second and final stage: special coalescing filter

OPTIONS

  • Additional suction gas filtration for dust particles max. 0.1 micron/m³

  • Additional oil separator with residue of 0.003 mg/m³

  • Gas dehumidification

  • Heat recovery system from oil circuit

  • Gas and oil circuit in AISI 304 or 316

  • Acoustic cabinet

  • Acoustic cabinet with separate section for electrical system and control system

  • Minimum external operating temperature of -20°C

  • By-pass recirculation valve

  • Bleed valve

  • Special dry cooler for gas, oil, water, megaohm

  • Chiller for gas cooling

  • Gas flow control with automatic gate valve inside the compressor

  • PLC for optimal control and energy saving of the unit managed by the Technokomp control system

  • Communication port for remote control

  • Electrical system or components

  • On-site commissioning and training

  • Maintenance/service/complete assistance

ACOUSTIC CABINET

Sound-absorbing cabinet for the entire gas compression unit. Noise reduction will be between 85 dBA and 65 dBA at 1 m from the unit. Gas detectors, a temperature transmitter, a lighting system and a dual ventilation system for hazardous areas will be installed inside the cabinet. The cabinet will be designed for outdoor operation and for all types of external weather conditions.

CABINET FOR DOUBLE COMPRESSOR

CABINET FOR DOUBLE COMPRESSOR